Conveyor Belt Transplanting Equipment
Equipment Features:
- Simple and easy operation
- Easy to master and maintain
- No parameter setting required
- Compatible with multi-size parts
- Code reader for automatic subcontracting
- Can cache up to 3 packs of cloth
Equipment Components:
Company Name: Suzhou Conversion Technology Co., Ltd.
| Serial No |
Name |
Form |
Description of use |
| 1 |
Transmission module |
Receiving conveyor belt |
The cutting and receiving station of the dryer has built-in sensors to dynamically detect the cutting position |
| Buffer conveyor belt |
Collect the cloth and stack it neatly |
| Pressing tooling |
Remove the cloth gap and increase the stacking layers |
| 2 |
Code reader |
High speed code reader |
Used for dynamic identification of cloth cutting information for subcontracting judgment |
| 3 |
Electrical control system |
PLC touch screen sensor |
System action control |
| 4 |
Mechanism |
Other mechanism components |
- |
Product Description
Suzhou Conversion Technology Co., Ltd.
Equipment Operation Description:
- The splice conveyor belt slices at the end of the dryer, with a built-in sensor detecting the fabric edge for feedback collection.
- The buffer conveyor belt flatly transplants fabric, stacking it to user-specified heights across 3 stations totaling 4.5 meters in length.
- Palletizing layers are determined by material barcode information recognized by the front-end camera, ensuring proper wrapping and layering with two-dimensional codes.
Equipment Technology and Environmental Requirements:
- The equipment layout is ergonomic, with a scientific and aesthetically pleasing wiring design that prohibits sharp corners and angles, ensuring human contact points are adequately protected.
- The equipment meets electrical and environmental standards for optimal performance and sustainability.
| Ambient temperature |
-25-60ºC |
| Relative humidity |
20-80% non-condensing |
| Flammable gas |
None |
| Corrosive gas |
None |
| Compressed air source |
0.4-0.6MPa,flow rate not less than 400L/min |
| Supply voltage |
Single-Phase AC 220V±10% 50Hz |
Flat incoming parts with fixed spacing and no overlap. Suitable for a range of part sizes. Ideal for Textile Recycling Machine Cutting Piece Conveyor.
| Cutting length range:(25-75)cm |
|
| Cutting width range:(10-85)cm |
| Stacking height:<25cm(the lower edge of the drying line is not less than 0.72 from the ground) |
Safety Requirements
5. Safety Requirements:
- The device is equipped with an emergency stop function.
- The electric control cabinet is labeled with electrical warnings and must have proper grounding, including a public grounding end.
- All wiring must be securely fastened and identified with consistent line numbers corresponding to electrical drawings. Wiring in the electrical cabinet should be neatly arranged in the online slot.
Company Name: Suzhou Conversion Technology Co., Ltd.
Audited Supplier 
){kind=link}