Garment Cutting Piece Handling Conveyor System

• Warranty: 1 Year
• Condition: New
• After-sales Service: Free in The Warranty Period
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SM
• Brand: Smartenall
• Transport Package: Cartons
• Specification: 2840*1890*1440
• Trademark: Smartenall
• Origin: Suzhou
• HS Code: 8428399000

Product Description

Conveyor Belt Transplanting Equipment



 

Equipment Features:

 

• Simple and easy operation for conveyor belt transplanting


• No parameter setting required, compatible with various part sizes


• Code reader automatically reads bar code information for subcontracting


• Can cache up to 3 packs of cloth


 

 

Equipment Components:

 

Company Name: Suzhou Conversion Technology Co., Ltd.

 

Serial No	Name	Form	Description of use
1	Transmission module	Receiving conveyor belt	The cutting and receiving station of the dryer has built-in sensors to dynamically detect the cutting position
		Buffer conveyor belt	Collect the cloth and stack it neatly
		Pressing tooling	Remove the cloth gap and increase the stacking layers
2	Code reader	High speed code reader	Used for dynamic identification of cloth cutting information for subcontracting judgment
3	Electrical control system	PLC touch screen sensor	System action control
4	Mechanism	Other mechanism components	-

Product Description



 

Suzhou Conversion Technology Co., Ltd.

 

Equipment Operation Description:

 

1. The splice conveyor belt slices fabric at the end of the dryer using a built-in sensor to detect the fabric edge. Feedback equipment collects the cloth.


2. The buffer conveyor belt flatly transplants and stacks fabric to the user-specified height. The receiving buffer has 3 stations and a total length of 4.5 meters.


3. Palletizing layers are determined by material barcode information from the front-end camera. Fabric is sub-wrapped and layered based on the two-dimensional code for palletizing and division.


 

 

Equipment Technology and Environmental Requirements:

 

1. The equipment layout is ergonomic, with a scientific and aesthetically pleasing wiring design. Sharp corners and angles are prohibited, and human contact areas are properly protected.


2. Equipment meets electrical and environmental requirements.


 

 

Ambient temperature	-25-60ºC
Relative humidity	20-80% non-condensing
Flammable gas	None
Corrosive gas	None
Compressed air source	0.4-0.6MPa,flow rate not less than 400L/min
Supply voltage	Single-Phase AC 220V±10%  50Hz

Suzhou Conversion Technology Co., Ltd. presents the Garment Cutting Piece Handling Conveyor System for flat parts with fixed spacing and a specified size range.

Cutting length range:(25-75)cm
Cutting width range:(10-85)cm
Stacking height:<25cm(the lower edge of the drying line is not less than 0.72 from the ground)

Safety Requirements



 

5. Safety Requirements:

 

1. The device is equipped with an emergency stop function.


2. The electric control cabinet is labeled with electrical warnings and must have proper grounding, including a public grounding end.


3. All wiring must be securely fastened and identified with line numbers corresponding to electrical drawings. Wiring in the electrical cabinet should be neatly arranged in the online slot.


 

 

Company Name: Suzhou Conversion Technology Co., Ltd.