Conveyor Belt Transplanting Equipment
Equipment Features:
- Simple and easy to master conveyor belt transplanting operation
- No parameter setting required, compatible with multi-size parts
- Code reader automatically subcontracting bar code information of parts
- Can cache up to 3 packs of cloth
Equipment Components:
Manufactured by Suzhou Conversion Technology Co., Ltd.
Serial No |
Name |
Form |
Description of use |
1 |
Transmission module |
Receiving conveyor belt |
The cutting and receiving station of the dryer has built-in sensors to dynamically detect the cutting position |
Buffer conveyor belt |
Collect the cloth and stack it neatly |
Pressing tooling |
Remove the cloth gap and increase the stacking layers |
2 |
Code reader |
High speed code reader |
Used for dynamic identification of cloth cutting information for subcontracting judgment |
3 |
Electrical control system |
PLC touch screen sensor |
System action control |
4 |
Mechanism |
Other mechanism components |
- |
Product Description
Equipment Operation Description:
- The splice conveyor belt slices at the end of the dryer, with a built-in sensor detecting the fabric edge for precise feedback.
- The buffer conveyor belt smoothly transfers and stacks fabric to user-specified heights across 3 stations, totaling 4.5 meters in length.
- Palletizing layers are determined by material barcode information, ensuring efficient sub-wrapping and layering based on two-dimensional codes.
Equipment Technology and Environmental Requirements:
- The equipment layout is ergonomic, with a scientific and aesthetically pleasing wiring design that eliminates sharp corners and angles for user safety.
- The equipment meets electrical and environmental standards for optimal performance and sustainability.
Company Name: Suzhou Conversion Technology Co., Ltd.
Ambient temperature |
-25-60ºC |
Relative humidity |
20-80% non-condensing |
Flammable gas |
None |
Corrosive gas |
None |
Compressed air source |
0.4-0.6MPa,flow rate not less than 400L/min |
Supply voltage |
Single-Phase AC 220V±10% 50Hz |
Flat incoming parts with fixed spacing and no overlap, suitable for a range of sizes. Ideal for garment cutting pieces on Suzhou Conversion Technology Co., Ltd.'s Conveyor Device.
Cutting length range:(25-75)cm |
|
Cutting width range:(10-85)cm |
Stacking height:<25cm(the lower edge of the drying line is not less than 0.72 from the ground) |
Safety Requirements - Suzhou Conversion Technology Co., Ltd.
Safety Requirements:
- The device is equipped with an emergency stop function.
- The electric control cabinet is labeled with electrical warnings and must have proper grounding.
- All wiring must be secure and properly identified according to electrical drawings.
- Wiring in the electrical cabinet should be neatly arranged in the online slot.