Conveyor Belt Transplanting Equipment
Equipment Features:
- Simple and easy operation
- Easy to master and maintain
- No parameter setting required
- Compatible with multi-size parts
- Automatic subcontracting with code reader
- Can cache up to 3 packs of cloth
-
Equipment Components:
Company Name: Suzhou Conversion Technology Co., Ltd.
| Serial No |
Name |
Form |
Description of use |
| 1 |
Transmission module |
Receiving conveyor belt |
The cutting and receiving station of the dryer has built-in sensors to dynamically detect the cutting position |
| Buffer conveyor belt |
Collect the cloth and stack it neatly |
| Pressing tooling |
Remove the cloth gap and increase the stacking layers |
| 2 |
Code reader |
High speed code reader |
Used for dynamic identification of cloth cutting information for subcontracting judgment |
| 3 |
Electrical control system |
PLC touch screen sensor |
System action control |
| 4 |
Mechanism |
Other mechanism components |
- |
Equipment Description
Equipment Operation Description:
- The splice conveyor belt slices at the end of the dryer, with a built-in sensor detecting the fabric edge for feedback collection.
- The buffer conveyor belt smoothly transfers and stacks fabric to user-specified heights, with a 4.5-meter total length and 3 stations for receiving buffer.
- Palletizing layers are determined by material barcode information from the front-end camera, ensuring proper wrapping and layering based on two-dimensional codes.
-
Equipment Technology and Environmental Requirements:
- The equipment layout is ergonomic, with a scientific and aesthetically pleasing wiring design that prohibits sharp corners and angles for user safety.
- Electrical and environmental requirements are met to ensure optimal equipment performance and user safety.
-
Company Name: Suzhou Conversion Technology Co., Ltd.
| Ambient temperature |
-25-60ºC |
| Relative humidity |
20-80% non-condensing |
| Flammable gas |
None |
| Corrosive gas |
None |
| Compressed air source |
0.4-0.6MPa,flow rate not less than 400L/min |
| Supply voltage |
Single-Phase AC 220V±10% 50Hz |
Flat incoming parts with fixed spacing and no overlap accepted within specified size range.
| Cutting length range:(25-75)cm |
|
| Cutting width range:(10-85)cm |
| Stacking height:<25cm(the lower edge of the drying line is not less than 0.72 from the ground) |
Safety Requirements - Suzhou Conversion Technology Co., Ltd.
5. Safety Requirements:
- The device is equipped with an emergency stop function.
- The electric control cabinet includes electrical warnings and labels, with proper grounding and a public grounding end.
- All wiring must be secure and properly identified with line numbers corresponding to electrical drawings. Wiring in the electrical cabinet should be neatly arranged in the online slot.
-
){kind=link}